SERVICES
ACS CARAVAN AND MOTOR HOME SERVICE AND SAFETY CHECK
Service and Safety Check Schedule
Bodywork Exterior
-
Check condition and security of body panels
-
Check operation of door locks, catches and hinges and lubricate
-
Check condition and security of all trims, inserts and sealants
-
Check windows and seals for damage
-
Check condition and security of grab handles
-
Check security of body attachments (ladders, aerials, cycle racks etc.)
Bodywork Interior
-
Damp meter test
-
Check floor for delamination
-
Check operation of cupboard hinges, catches, locks and stays
-
Check operation and condition of all window catches, stays and seals
-
Check operation and security of all skylights
-
Check operation of blinds and fly screens. Adjust if required
-
Check fixed ventilation openings for free flow of air
Water System and Appliances
-
Check operation and condition of water pump
-
Check operation of pressure switch and adjust if required
-
Check condition of water filter and housing (replace filter if required)
-
Check operation of taps and shower fittings (including external taps if fitted)
-
Check overall condition of fresh and waste water pipes and fittings
-
Check toilet for operation and condition of seal, blade and flush
-
Check drain plugs for seal and operation (Drain down system in winter)
Gas Supply and Appliances
-
Fridge not serviced unless requested
-
Check regulator performance and carry out leak test
-
Check condition and date of flexible hose
-
Check condition and security of all pipe work
-
Check condition of LPG sticker on locker and security of gas bottles
-
Check gas dispersal holes for obstructions
-
Check fridge ignition, FFD and cooling
-
Check operation of cooker, hob and oven. Ignition, flame and FFD
-
Check operation of space heater. Ignition, flame, FFD and CO room test
-
Check operation of water heater. Ignition, flame, FFD and heating
-
Check condition of external gas point if fitted
Electrical Systems 240v
-
Check condition of inlet plug and hook up cable (when available)
-
Operation of RCD, MCB’s and earth bonding
-
Check condition of wiring, sockets and fixed connections
-
Check operation of battery charger
-
Check mains operation of fridge
-
Check mains operation of cooker and hob
-
Check mains operation of water heater
-
Check mains operation of space heater
Electrical Systems 12v
-
Check condition of 12N and 12S plugs and cables
-
Check condition and operation of road lights and reflectors
-
Check condition of wiring, sockets and fuses
-
Check functions of 12S system (charging, fridge, lights etc.)
-
Check condition of battery. Clean and lubricate terminals
-
Check operation of all 12v lights including awning light
-
Check blown air system
Fire and safety
-
Check condition of security, smoke and carbon monoxide alarms
-
Check condition, type and expiry date of fire extinguisher
-
Check condition and location of fire blanket
-
Check operation, function and safety of DIY additions
Chassis and Running Gear
-
Check coupling head and safety catch for wear and lubricate if required
-
Check and clean pads on ball acting stabiliser
-
Check condition and routing of breakaway cable and clip
-
Check operation of overrun piston and lubricate
-
Check operation of jockey wheel clean and lubricate
-
Check operation of handbrake and lubricate
-
Check brake rods, cables and supports
-
Remove wheels and check tyres for wear, damage, age and pressure
-
Remove brake drums check bearings, seals and linings. Clean and lubricate
-
Replace drum with new split pin or one shot nut and torque as required
-
Adjust brakes at drum and check free play in the linkage and at handbrake
-
Replace road wheels and torque wheel nuts / bolts to manufacturers settings
-
Check condition and security of chassis and attachment to body
-
Check operation of suspension assemblies
-
Check corner steadies’ operation and lubricate
-
Check spare wheel carrier and folding step for operation and lubricate
A FULL WATER INGRESS (DAMP) REPORT IS INCLUDED WITH YOUR SERVICE

TITLE
TITLE
Gait systems installed

TITLE
BBQ Points installed
Sol,ar panel installation